Brian Enos's Forums... Maku mozo!: Jp handguard, barrel retainer lock nut question - Brian Enos's Forums... Maku mozo!

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Jp handguard, barrel retainer lock nut question

#1 User is offline   Bob Ghengis Khan 

  • Looks for Range
  • Pip
  • Group: Members
  • Posts: 13
  • Joined: 02-April 09
  • Location:New Smyrna Beach, FL

Posted 29 October 2009 - 11:43 AM

I'm installing a full length VTAC handguard. The instructions call for applying anti seize compound to the barrel retainer lock nut and screwing it into the extension nut, then letting the rifle sit overnight to let the Loctite cure. Why does the lock nut go on in this step, when it has to be taken off 24 hrs later to put the barrel on after the loctite cures?

Maybe I am just misunderstanding when the barrel actually goes on

This post has been edited by Bob Ghengis Khan: 29 October 2009 - 11:43 AM


#2 User is offline   lefty556 

  • Looks for Match
  • Pip
  • Group: Classified
  • Posts: 48
  • Joined: 01-February 07

Posted 29 October 2009 - 12:45 PM

You put the lock nut into the receiver nut to hold the alignment for the gas tube hole while the loctite dries. You might can get away without it, but you run the risk of mis-alignment. Not something you want to deal with when red loctite is involved.

#3 User is offline   outerlimits 

  • Burned Out
  • PipPipPipPipPipPip
  • Group: Classified
  • Posts: 2,288
  • Joined: 04-September 03
  • Gender:Male
  • Location:Rancho Murieta, CA

Posted 29 October 2009 - 02:07 PM

http://www.brianenos...?...66489&hl=jp
"We're Marines, We took Iwo Jima. Baghdad ain't shit." - Gen. Kelly, USMC

"We have two companies of Marines running rampant all over the northern half of this island, and three Army regiments pinned down in the southwestern corner, doing nothing. What the hell is going on? " - Gen. John W. Vessey Jr., USA, Chairman of the the Joint Chiefs of Staff; during the assault on Grenada, 1983

"A golf course is the willful and deliberate misuse of a perfectly good rifle range." - Jeff Cooper

"Character is doing what's right when nobody's looking." - J.C. Watts

#4 User is offline   Bob Ghengis Khan 

  • Looks for Range
  • Pip
  • Group: Members
  • Posts: 13
  • Joined: 02-April 09
  • Location:New Smyrna Beach, FL

Posted 29 October 2009 - 02:23 PM

View Postouterlimits, on Oct 29 2009, 05:07 PM, said:



I had read that post today when I did a search, but to be sure, do you take the retainer nut off after the loctite sets to put the barrel in, or is the barrel supposed to be on the whole 24 hrs? And lefty, is that because of a concern the outer nut will shift during the drying time, and putting in the retainer nut helps prevent it from shifting?

This post has been edited by Bob Ghengis Khan: 29 October 2009 - 02:24 PM


#5 User is offline   outerlimits 

  • Burned Out
  • PipPipPipPipPipPip
  • Group: Classified
  • Posts: 2,288
  • Joined: 04-September 03
  • Gender:Male
  • Location:Rancho Murieta, CA

Posted 29 October 2009 - 02:55 PM

View PostBob Ghengis Khan, on Oct 29 2009, 02:23 PM, said:

View Postouterlimits, on Oct 29 2009, 05:07 PM, said:



I had read that post today when I did a search, but to be sure, do you take the retainer nut off after the loctite sets to put the barrel in, or is the barrel supposed to be on the whole 24 hrs? And lefty, is that because of a concern the outer nut will shift during the drying time, and putting in the retainer nut helps prevent it from shifting?

i did the pin route like gentleman jim suggested...came right off the next day.
"We're Marines, We took Iwo Jima. Baghdad ain't shit." - Gen. Kelly, USMC

"We have two companies of Marines running rampant all over the northern half of this island, and three Army regiments pinned down in the southwestern corner, doing nothing. What the hell is going on? " - Gen. John W. Vessey Jr., USA, Chairman of the the Joint Chiefs of Staff; during the assault on Grenada, 1983

"A golf course is the willful and deliberate misuse of a perfectly good rifle range." - Jeff Cooper

"Character is doing what's right when nobody's looking." - J.C. Watts

#6 User is offline   lefty556 

  • Looks for Match
  • Pip
  • Group: Classified
  • Posts: 48
  • Joined: 01-February 07

Posted 02 November 2009 - 10:34 AM

Sorry I didn't get back sooner. I have always set the loctite without the barrel in place. After 24 hours, pull it apart, put the barrel in and reassemble. Just make sure the index pin goes into the receiver correctly.

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users