[G+16]

Morning: Is the Dillon case trimmer the fastest and as per the best money spent for trimming, or is there something else made that is better and do's more?
thanks

[RiggerJJ]

I've used a Gracy, don't like holding the brass in the trimmer with my fingers, I get major cramping because of arthritis. and getting thru a bucket of 223 takes forever...

Using the Dillon trimmer, I hold the handle down for a count of 1 potato, 2 potato, and then cycle it. using a double head system (one for brass processing, one for priming and loading) you only have to handle the brass twice with a tumbling before each process, and then guage the loaded ammo...

during the brass procesing step, getting thru a bucket of 223 brass can be done in a couple of hours.

do a search, there is lots of info here...

jj

This post has been edited by RiggerJJ: 28 October 2009 - 07:37 AM

[an1913t]

You might look at a Giruad.

It is on the expensive side but has an excellent reputation.

http://www.giraudtool.com/prod02.htm

[Singlestack]

IMO, there is nothing faster than the Possum Hollow trimmer. Get the drill attachment.

http://www.midwayusa...ctnumber=127743

http://www.midwayusa...ctnumber=295771

[NuJudge]

G+16, on Oct 28 2009, 08:58 AM, said:

Morning: Is the Dillon case trimmer the fastest and as per the best money spent for trimming, or is there something else made that is better and do's more?
thanks

I cannot immagine anything being faster than a Giraud. It trims, inside & outside chamfers, all in one motion. I did 4000 .223 cases in one long evening. It is hard on fingertips, so use gloves.

The Giraud changes calibers very quickly, especially between close calibers such as .308 & .303.

CDD

[blkbrd]

an1913t, on Oct 29 2009, 07:53 AM, said:

You might look at a Giruad.

It is on the expensive side but has an excellent reputation.

http://www.giraudtool.com/prod02.htm

Tried then all and the Giraud is the best.