Brian Enos's Forums... Maku mozo!: KC area gunsmiths - Brian Enos's Forums... Maku mozo!

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

KC area gunsmiths

#1 User is offline   SHinck82 

  • Looks for Range
  • Pip
  • Group: Members
  • Posts: 24
  • Joined: 05-October 09
  • Gender:Male
  • Location:Independence, MO

Posted 19 October 2009 - 03:51 PM

Is anyone here ok know of any good KC area gunsmiths who do work on 1911s? More specifically paras
"Let's Go" 325 A.I.R.
You can take my freedom of speech I'll still think you are an idiot
You can take my freedom of religion I'll still believe in God
Try to take my 1911 and you will get it one .45 round at a time

#2 User is online   Toolguy 

  • Calls Shots
  • PipPipPipPipPip
  • Group: Forum Dealer
  • Posts: 937
  • Joined: 17-January 07
  • Gender:Male
  • Location:Lenexa, Kansas

Posted 21 October 2009 - 10:47 AM

You might call Mike Allee at Gunsmithing Only. He doesn't specialize in handguns, but is pretty good with everything. 913-722-6606.
Website - Gunsmithingonly.com
Warren Moore

Please indicate your interest in custom S&W front sights in this thread.

Please visit our Protocall Design Dealer Forum for information on our products.

#3 User is offline   Cigar Guy 

  • aka: Scott Hattrup
  • PipPip
  • Group: Classified
  • Posts: 65
  • Joined: 01-September 08
  • Gender:Male
  • Location:Lenexa, KS

Posted 01 November 2009 - 11:07 AM

Another option is Randy Brockman. He usually just works on 1911s and is setting up his own machine shop near Cole Camp, MO. Mobile 913-645-9739
Scott H.

Cool new screen name inspired by Mr. Zerwas.

#4 User is offline   kurtm 

  • Mr. Weak Hand
  • PipPipPipPipPipPip
  • Group: Classified
  • Posts: 2,953
  • Joined: 11-July 02
  • Gender:Male
  • Location:North of EDEN...Wyoming

Posted 02 November 2009 - 09:18 AM

I know it isn't K.C. but Eric Copeland in Winfield Ks. Does outstanding Para work.
Bleeding is merely the first step in the healing process.

Fight Global Cooling...Spray Paint Targets!

#5 User is offline   Resjudicata 

  • Sees Sights Lift
  • PipPipPipPip
  • Group: Classified
  • Posts: 476
  • Joined: 21-April 06
  • Gender:Male
  • Location:KC, MO

Posted 02 November 2009 - 03:17 PM

In the area, Randy Brochman, is probably the only one I know of locally that I would allow to touch my automatics. Toolguy above is the only one I would allow to work on my revolvers.

I wish I could remember the name of the gunsmith but one of our local guys had a local "smith" build his STI based Limited gun. It looked and functioned like a drunken monkey had built it. The guy didn't even install the pin that holds the ejector in the gun. I would be very careful with choosing any of the "gunsmiths" in the area. You would be better off selecting one of the big names on this forum. You may pay more but if you are going to trust someone else to do the work you would be wise to choose carefully.

Chris

ETA, that I do almost all of my own work because I'm a picky bastard and I don't want to have to blame someone else. I'd rather blame myself if something doesn't work. :wacko:

This post has been edited by Resjudicata: 02 November 2009 - 03:19 PM

SPOOOOONN!!!

STI - Drive it like you stole it!!

Revo disciple: (1, 2, 3, 4, 5, 6, click, click, reload, "Get in the damn hole," repeat as needed)
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users