26 replies to this topic

[RIIID]

Here's a couple of the latest builds.

Attached Files

•  Six_pair.gif   101.75K   539 downloads
•  A_Lim_rt.gif   167.31K   463 downloads
•  RedT.gif   170.69K   332 downloads

[Flexmoney]

Rich,

Those look good.

I've post some pics of your work over on the LTW forum in their competition section. They don't get to see much in the way of competition guns over there. You should think about adding to their list too.

http://www.loudertha...f44f52395572dce

[Albertl35]

The one on the left is mine. Awesome craftmanship and shoots one ragged hole. Rich is also great and easy to work with. I am going to have him built me another to back this one up. Thanks Rich!

Edited by Albertl35, 01 November 2009 - 04:25 PM.

[dr2e]

The one on the left is mine. Awesome craftmanship and shoots one ragged hope. Rich is also great and easy to work with. I am going to have him built me another to back this one up. Thanks Rich!

nice mr. lim and vey nice work rich. lucky!@!@! ragged hope?

Edited by dr2e, 01 November 2009 - 02:47 PM.

[Albertl35]

The one on the left is mine. Awesome craftmanship and shoots one ragged hope. Rich is also great and easy to work with. I am going to have him built me another to back this one up. Thanks Rich!

nice mr. lim and vey nice work rich. lucky!@!@! ragged hope?

Wish I could type...;-)

[dr2e]

The one on the left is mine. Awesome craftmanship and shoots one ragged hope. Rich is also great and easy to work with. I am going to have him built me another to back this one up. Thanks Rich!

nice mr. lim and vey nice work rich. lucky!@!@! ragged hope?

Wish I could type...;-)

wish i could have the contents of your safe...(and such an understanding mrs. ...)

Edited by dr2e, 01 November 2009 - 05:45 PM.

[RIIID]

I got an EMP finished up, it has the following- Heinie Slant Pro/ front sight has a tritium insert, Heinie mag well with Monkey grips- worm pattern, 25 lpi checkered front strap, under cut trigger guard, grip safety cut higher, 40 lpi serrations back of the slide, crowned barrel, snake bellied top, aluminum frame is coated in KG Gun-Kote Teflon flat black, the steel parts are done in our "Hard Blue" finish. New trigger and 3.5# trigger job, this gun fits in the hand perfect. The lip on the front of the magwell gives a good hold point for the little finger.

Attached Files

•  EMP_lft.gif   94.69K   62 downloads
•  EMP_rt2.gif   87.78K   82 downloads
•  EMP_main.gif   132.55K   50 downloads
•  EMP_frt_lip.gif   101.18K   43 downloads
•  EMP_top.gif   43.91K   61 downloads

[RIIID]

A couple more.

Attached Files

•  EMP_rear_sight.gif   224.41K   24 downloads
•  EMP_leftw.gif   102.75K   34 downloads
•  EMP_corner.gif   71.83K   29 downloads
•  EMP_mw.gif   76.17K   33 downloads

[RIIID]

This TD's IDPA 9mm dressed up slightly. I squared the trigger guard and added 25 lpi to the bottom, 20 lpi checkered front strap, under cut, S&A magwell opened up, SV tri glide trigger sys., Dawson front sight, King's ambi, grip safety blended, the whole gun is done in Hard Blue.

Attached Files

•  TD_9mm.gif   64.14K   113 downloads
•  TD_9mm_2.gif   68.32K   95 downloads
•  TD_9mm_3.gif   82.07K   109 downloads
•  TD_9mm_4.gif   109.6K   100 downloads
•  TD_9mm_5.gif   93.29K   100 downloads

[JimmyZip]

Rich,

What is the advantage, or the reason that people like the squared trigger guard? Is it difficult to find holsters for a pistol once this is done?

JZ

[RIIID]

Why a squared trigger guard, gives more room for the trigger finger(trigger slapping), gives more area for the weak hand index finger to firmly stay in place, it gives the gun a touch of class, and .........
I haven't had any problems with 1911 holsters not working with a gun that has a squared trigger guard.
Rich

[kylethunder380]

I happen to think it looks cooler than a rounded trigger guard, and nobody does them as nicely as Rich does.

-Kyle

[Handgunnr]

Super looking builds there Rich. Hope to get my EAA Match over to you for some magic after I put some rounds through it.

[RIIID]

A few more, first is an EMP in 40. I'm waiting for a set of grips from Larry Davidson(Monkey Grips) so I can complete it. Major mods are Heinie magwell, squared trigger guard, 25 lpi checkering on front strap and trigger guard, snake bellied, and Hard Blued.

Attached Files

•  EMP_40_full.gif   125.56K   76 downloads
•  EMP_40_frt_strap.gif   78.87K   51 downloads
•  EMP_40_serrations.gif   119.98K   39 downloads
•  EMP_40_tg.gif   78.92K   37 downloads
•  EMP_40_top.gif   64K   37 downloads

[RIIID]

Next one is a Para P16-40 Limited, this one I just up graded a few things. Snake bellied top with Dawson front and Kensight rear, 40lpi serrations on the back of slide, S&A magwell, Ed Brown grip safety, King's ambi, SVI ITS trigger, Kart bushing barrel, Keonig hammer, and Hard Blued. Price and complete list coming soon I hope.

Attached Files

•  Para_1.gif   101.49K   71 downloads
•  Para_back.gif   148.35K   48 downloads
•  Para_frt.gif   71.82K   40 downloads
•  Para_full_top.gif   80.58K   46 downloads
•  Para_p16.gif   70.91K   42 downloads

[RIIID]

A few more of the P16

Attached Files

•  Para_t_guard.gif   87.16K   36 downloads
•  Para_serrations.gif   122.89K   42 downloads
•  Para_MW_open.gif   86.09K   42 downloads
•  Para_rear.gif   171.16K   29 downloads

Edited by RIIID, 22 November 2009 - 04:06 PM.

[RIIID]

I've put together a couple of rifles first is a Rock River receiver set with a Walthar barrel, Thor comp, JP gas block and V-tac hand guard, Acurracy Speaks trigger group, and ARFX full stock. I haven't worked up a price yet.

Attached Files

•  RRV_full.gif   76.73K   54 downloads
•  RRV_lt_rec.gif   89.75K   41 downloads
•  RRV_barrel.gif   81.52K   31 downloads

Edited by RIIID, 22 November 2009 - 04:15 PM.

[RIIID]

The second one has a Rock River receiver set, Walthar barrel, Thor comp, Jard adjustable trigger group, hand guard has slots added, JP adj gas block, ARFX full stock. Price coming soon.

Attached Files

•  RRS_comp.gif   98.05K   17 downloads
•  RRS_full.gif   56.96K   22 downloads
•  RRS_hand.gif   77.93K   29 downloads
•  RRS_mid.gif   58.94K   19 downloads
•  RRS_rt_full.gif   37.22K   24 downloads

[RIIID]

A few pictures of a gun in the process of completion. It's a Caspian Ti Recon frame, with a Damascus slide, I had the slide Hard Blued, a Nowlin ramped 9mm barrel, and alot of slide work.

Attached Files

•  Damascus_side.gif   63.69K   88 downloads
•  Damascus_rear.gif   60.96K   84 downloads
•  Damascus_frt.gif   70.6K   86 downloads
•  Damascus_front.gif   58.61K   84 downloads
•  Damascus_dust_cover.gif   47.62K   56 downloads

[RIIID]

An Open gun for a client. On a side note anyone looking for a Doctor sight to be low mounted Beven Grams did this one and it is the best mounting I have come across.
Rich

Attached Files

•  Open_P_full_lt.gif   64.86K   129 downloads
•  Open_P_full_rt.gif   68.99K   152 downloads
•  Open_P_serrations.gif   73.41K   135 downloads
•  Open_P_tg.gif   68.63K   82 downloads
•  Open_P_comp.gif   44.83K   80 downloads
•  Open_P.gif   70.13K   81 downloads

Edited by RIIID, 22 November 2009 - 04:30 PM.

[JRBean]

An Open gun for a client. On a side note anyone looking for a Doctor sight to be low mounted Beven Grams did this one and it is the best mounting I have come across.
Rich

Wow!! Great looking Para. Canyon Creek sure bulids some cool guns. I don't think anyone else could make a Para look that good. One question, why the Docter sight instead of the new C-more STS?

[RIIID]

You would have to ask the client on why the Doctor sight.
Rich

[ken hebert]

A few pictures of a gun in the process of completion. It's a Caspian Ti Recon frame, with a Damascus slide, I had the slide Hard Blued, a Nowlin ramped 9mm barrel, and alot of slide work.

I'd like to see this one when completed.

[Handgunnr]

A few pictures of a gun in the process of completion. It's a Caspian Ti Recon frame, with a Damascus slide, I had the slide Hard Blued, a Nowlin ramped 9mm barrel, and alot of slide work.

Ti Frame and damascus slide...that's just insane...I've found my new dream gun. I'm not gonna even ask the price, I don't want to be tempted to sell my car...

[bulamike]

Very nice, keep em coming