[1frontsite]

i am a newbie to this forum and competitive shooting. i was shooting 9mm 147gr bullets from Precision Delta over 3.6gr of TG but PD says they will not be making anymore 147's this year so i've had to change bullets. a GM i shoot with told me to start shooting lead so i bought a Lone Wolf barrel for my G34. does anybody have a recipe for 125gr lead bullets. all of our shooting is done outside. i'm not sure what the deal with PD is since we had 10K rounds ordered from them. i would like to know powder to try, powder weight, and OAL. thanks in advance for any advice.

p.s. - reloading with Dillon 550

[gunther]

I use 5.1 grains of power pistol with bear creek bullets 125 gr.

[mike4045]

4.4 of WSF. I use it in a 34 with a Lone Wolf barrel.

[redwoods]

I just changed toolheads on my press and am starting to load 9mm for the first time in two years.
I am going to load up some 125gr. Lead bullets at minor power factor for my M&P 9pro. I am going to use AA Solo 1000 first. I also have some WST I may use. Titegroup is a good powder for 9 but smokey with lead. I have also used 231 in the past but with jacketed.

For OAL, I push the bullet in so it covers the lube ring and then a tiny bit more so the brass can get a good crimp. Also, some brass may be longer or shorter if you are using mixed range brass, so you want to give it a little leeway. I load them as long as I can for feeding and to fit in the magazine.

Randy

[Dave C]

125 grain lead round nose and 4.2 - 4.3 grains of WST.

Load to 1.130 OAL.

Makes about 1075 fps out of my 5 inch barrel.

This post has been edited by Dave C: 09 October 2009 - 06:58 PM

[L-10_shooter]

5.1 gr. of Ramshot Silhouette under a 125gr lead round nose 1.145 oal makes 130pf out of the 9mm barrel for my Glock 35.

[Cy Soto]

I load 125gr LRN by Two Alpha Bullets over 3.5gr of Clays with an OAL of 1.155" and a crimp of 0.376". It makes 130PF out of a G17 with the OEM barrel and 132PF out of a G34 with an LWD barrel.

I still have some Clays left but, once I finish it, I will try some Solo 1000. I have been told that it should take about 4.0gr to make PF but I haven't begun experimenting yet.

[Jman]

Searched "minor AND 125" in the 9mm sub-forum and this popped up.



http://www.brianenos...te=%2Bminor+125


Jim

[TM262]

XD9 Tactical
Solo 1000 4.0gr
S and S Casting 125gr LRN
OAL 1.130
PF 129.1
Hi 1042
Lo 1025
AVG 1033
ES 17
SD 6

This post has been edited by TM262: 10 October 2009 - 03:26 PM

[ben b.]

4.3 gr Solo 1000, 124 gr lead, 1.135" OAL, from a 4" Steyr M9A1, shot 12 feet from CED M2

March 2009
30 shots
Avg=1053 (sd=13)
Avg PF 130 (low PF 127- Hi PF 133)

June 2009
10 shots
1052 (5)
PF 130 (129-131)

July 2009
10 shots
1056 (9)
PF 131 (129-132)

This post has been edited by ben b.: 12 October 2009 - 08:41 AM