Thanks!
Page 1 of 1
Small rifle primers for 9mm Major
#3
Posted 03 September 2009 - 03:11 PM
I think small rifle primers are the "norm" in 9Major.
7.7gr Silhouette
124gr MG CMJ
Win SRP
1.170" COL
5" KKM barrel with a Bedell comp that has the front bleeder cut off. Makes 173pf consistently.
~Mitch
7.7gr Silhouette
124gr MG CMJ
Win SRP
1.170" COL
5" KKM barrel with a Bedell comp that has the front bleeder cut off. Makes 173pf consistently.
~Mitch
Mitch Lum
C-Open
C-Limited
C-Revolver
C-Single Stack
D-L10
Master - Taping
mitch@mitchlum.com
C-Open
C-Limited
C-Revolver
C-Single Stack
D-L10
Master - Taping
mitch@mitchlum.com
#4
Posted 03 September 2009 - 03:21 PM
7.5 gn of Ram Sil
124 gn MG CMJ
Federal Match SRP
1.175
Shuemann .355 w/ 2 popples and a Bedell Custom Ti 7 port comp
167 pf all day long
124 gn MG CMJ
Federal Match SRP
1.175
Shuemann .355 w/ 2 popples and a Bedell Custom Ti 7 port comp
167 pf all day long
#6
Posted 03 September 2009 - 06:25 PM
7.7gr Silhouette
124gr MGD
Wolf SRP (just switched from Wolf SPM)
1.185 OAL
172PF
5 inch Shuemann AET, Gans #12 comp
IMHO, there is little difference, if any, in PF between SRP and SPP for the same load.
The difference is the SRP are a bit harder primer.
124gr MGD
Wolf SRP (just switched from Wolf SPM)
1.185 OAL
172PF
5 inch Shuemann AET, Gans #12 comp
IMHO, there is little difference, if any, in PF between SRP and SPP for the same load.
The difference is the SRP are a bit harder primer.
This post has been edited by matt2ace: 03 September 2009 - 06:25 PM
#8
Posted 14 September 2009 - 08:21 AM
124 grain MG CMJ
8.0 grains Vhit 3N37
Federal or Winchester SRP
1.165" OAL
8.0 grains Vhit 3N37
Federal or Winchester SRP
1.165" OAL
Page 1 of 1

Sign In
Register
Help
MultiQuote




