[kz45]

My reticle has a 2 moa dot in a 10 moa circle, so if I draw 2" dot in a 10" circle everything should line up perfect, right?
My Q is can I just add 1" to the size of the circle and dot every 100yrd's and have the picture still look right, I'm thinking this will the best way to zero my scope. so the 200 will be a 3" dot with a 11" circle, 300 would be 4" and 12", is this right?

[dskd]

200 will be a 4" dot with a 20" circle, 300 would be 6" and 30" will be close as 1moa in not 1" at 100 yards but it real close

to work it out its

moa x range in yards / 100 = size in inches close enough

1 moa at 100 yards = 1.047 inches

[kz45]

dskd, on Aug 9 2009, 12:53 AM, said:

200 will be a 4" dot with a 20" circle, 300 would be 6" and 30" will be close as 1moa in not 1" at 100 yards but it real close

to work it out its

moa x range in yards / 100 = size in inches close enough

1 moa at 100 yards = 1.047 inches

Thank you