[Chris_Andersen]

So I ordinarily shoot a 9mm M&P in production, but am going to have it worked on so I want to make some .40 minor loads to run through my Glock 35 (eventually going to shoot that in limited) for a while.

I have a good quantity of Universal Clays and Titegroup powders and am wanting suggestions for a minor load using a 180gr bullet (montana gold or hornady XTP JHP's) for those powders.

Thanks

This post has been edited by BCA: 19 July 2009 - 07:02 PM

[WatchmanUSA]

BCA, on Jul 19 2009, 09:01 PM, said:

So I ordinarily shoot a 9mm M&P in production, but am going to have it worked on so I want to make some .40 minor loads to run through my Glock 35 (eventually going to shoot that in limited) for a while.

I have a good quantity of Universal Clays and Titegroup powders and am wanting suggestions for a minor load using a 180gr bullet (montana gold or hornady XTP JHP's) for those powders.

Thanks

I have a G35 and I load 3.8 gr of TG with 180gr Montana Golds.

[Mark R]

Try 2.6 gr Clays with 180 lead or 185 moly bullet with OAL 1.125" PF=130 out of a Glock 22 and very soft shooting. (Not Universal Clays...use regular Clays)

This post has been edited by Mark R: 24 July 2009 - 11:47 AM

[Tom D.]

I have used 3.7 gr Titegroup with 180 gr Billy Bullets & Black Bullets Int'l. with good success in both a G22 & M&P 40(the load that is).

[Flexmoney]

Lots of that info to be found using the search page...including the load out of my G35 that took me to GM and placed well at the Nationals. (fwiw)