Brian Enos's Forums... Maku mozo!: Which vibratory case cleaner should I buy? - Brian Enos's Forums... Maku mozo!

Jump to content

  • (3 Pages)
  • +
  • 1
  • 2
  • 3
  • You cannot start a new topic
  • You cannot reply to this topic

Which vibratory case cleaner should I buy? Best for the money?

#1 User is offline   bball97 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 85
  • Joined: 19-April 09
  • Gender:Male
  • Location:North Carolina

Posted 06 July 2009 - 04:42 PM

Hey all, I am starting to look into which case cleaner I should order. What is your recommendation?
Reject passivity, accept responsibility, lead courageously, expect the greater reward!

#2 User is offline   xcelr8hard 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 88
  • Joined: 19-May 08
  • Gender:Male
  • Location:Tucson, Az

Posted 06 July 2009 - 04:47 PM

I'm sure most will reply with Dillon.
I run a Lyman with the auto flo feature. The auto flo doesn't work as well as I had hoped, so now I just empty it like everybody else.
I haven't had any problems with my current machine.

Butch
Common Sense....This is your wake up call

#3 User is offline   Joe4d 

  • Elite Operator
  • PipPipPipPipPipPip
  • Group: Classified
  • Posts: 2,213
  • Joined: 23-November 05
  • Gender:Male
  • Location:Surry VA

Posted 06 July 2009 - 05:50 PM

I have two Lymans die, one in a matter of months, The only one I would reccommend are the Dillons, the small one uses a heavy duty sealed motor, Lyman, Midway, Frankford, cabelas. all seam to use the same motors. These are like Pintos, You might get one that runs for years or 3 in a row that die in a week.

#4 User is offline   21 shooter 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 106
  • Joined: 03-August 02

Posted 06 July 2009 - 06:00 PM

I would have to vote for the Dillon. I have used Lyman and Hornady tumblers, and the Dillon is the best. It will probably cost more, but I think you get what you pay for.

#5 User is offline   Storm52 

  • Looks for Target
  • PipPipPip
  • Group: Classified
  • Posts: 186
  • Joined: 02-February 09
  • Gender:Male
  • Location:Bossier City, LA

Posted 06 July 2009 - 09:33 PM

Purchase the best one you can afford. I have 2 Lymans. One is 12 years old and the other is 4. The Dillon will replace one or both when they melt down.

#6 User is offline   joecichlid 

  • Beyond it All
  • PipPipPipPipPip
  • Group: Classified
  • Posts: 1,063
  • Joined: 10-December 04
  • Gender:Male
  • Location:Kansas City, Kansas

Posted 06 July 2009 - 09:56 PM

I swear by my Lymann tumblers. Just had to replace my oldest after about 13 years and for the record I got it used. My guess is that thing cleaned well over 200,000 pieces of brass in that time. And most of the time I ran it I would let it run for about 12 to 24 hours, never can remember when I am running it as it is in the basement and I never hear it. lol

Joe W.

#7 User is offline   Graham Smith 

  • Beyond it All
  • PipPipPipPipPip
  • Group: Classified
  • Posts: 1,630
  • Joined: 05-July 07
  • Gender:Male
  • Location:Wilmington, Delaware

Posted 07 July 2009 - 05:32 AM

I'd have to go against the flow on this and say that unless you are doing a lot of volume, a cheap Frankford will probably work just fine for you. The small Dillon is about 2.5 times the price of the Frankford which quite literally means you can buy two plus media for the same price. And we're not talking about anything high tech here - just something that holds stuff and shakes.
"For every expert there is an equal and opposite expert.", Arthur C. Clarke (1917 - 2008)
“Time flies like an arrow; fruit flies like a banana.”, Groucho Marx (1890 - 1977)

#8 User is offline   tohlmann 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 107
  • Joined: 23-August 08
  • Gender:Male
  • Location:Midland, TX

Posted 07 July 2009 - 05:42 AM

+1 for the "inexpensive" Frankford. Sometimes Midway USA runs a sale on them for $29.95. I've got two and have done 10's of 1000's of cases in them. Oh, by the way, the first case cleaner I bought was a Dillon. Lasted just over a year and the motor went out. Cost to replace the motor.... the price of a Frankford. Don't get me wrong about Dillon, they are the best at customer service and their products are first rate but their case cleaners, not so much.

#9 User is offline   Albert 

  • Sees Sights
  • PipPipPipPip
  • Group: Classified
  • Posts: 254
  • Joined: 24-October 05
  • Gender:Male
  • Location:Seattle Washington

Posted 07 July 2009 - 07:04 AM

I started out with a Thumler's Tumbler and then acquired a Dillon.

The Thumler get's the cases cleaner faster and better than the Dillon and seems to get the media and cases moving better, plus the bowl is removalable.

#10 User is offline   islandtime 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 78
  • Joined: 16-March 08
  • Gender:Male
  • Location:Mobile, Alabama

Posted 07 July 2009 - 07:40 AM

I bought the Frankford tumbler and media separator combo from Midway. I have tumbled about 5000 rounds so far with no problems. If I were to do anything different at this point it would be to purchase the Dillon small media separator. I am happy with the Frankford tumbler and for the price can afford to buy a couple more with the money save versus the price of some of the other brands.

#11 User is offline   03k64 

  • Sees Sights Lift
  • PipPipPipPip
  • Group: Classified
  • Posts: 395
  • Joined: 19-August 07
  • Gender:Male
  • Location:LI, NY

Posted 07 July 2009 - 07:49 AM

I had a Frankford tumbler that gave out just before the warranty expired. Midway sent me a replacement and that one has been working fine since. When this one breaks, I'll be looking for something else.
Can't stop the signal.

#12 User is offline   Fast Shooter Wannabe 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 53
  • Joined: 22-May 09
  • Gender:Male
  • Location:Aurora, CO

Posted 07 July 2009 - 08:02 AM

I have the Dillon small tumbler, which I can easily recommend. But, I found that Flitz polish is better for cleaning the brass rather than the Dillon polish. Just another man's opinion.

Jason

This post has been edited by Fast Shooter Wannabe: 07 July 2009 - 08:02 AM


#13 User is offline   HSMITH 

  • Scaring old ladies and children....
  • PipPipPipPipPipPipPip
  • Group: Classified
  • Posts: 4,823
  • Joined: 19-January 06
  • Gender:Male
  • Location:Racine, WI

Posted 07 July 2009 - 08:08 AM

Call Brian and get the big ass Dillon. It isn't cheap but once you use it none of the others measure up. I've had a bunch of others, including the ones recommended in this thread, and the big Dillon kills them. Far better unit.

#14 User is online   redwoods 

  • Sees Sights Lift
  • PipPipPipPip
  • Group: Classified
  • Posts: 403
  • Joined: 06-April 05
  • Gender:Male
  • Location:Vail, Colorado

Posted 07 July 2009 - 08:42 AM

I have a CV-500 from Dillon. It is the smaller one. I got it used when I got my reloader. I then bought a Lyman auto-flo 2200. I have and use both. The new dillon CV-750 replaced the CV-500 and I read that it has the same motor as the big one...CV-2001. I would buy the CV-2001 if I didn't already have two small ones. If you are going to reload a lot, get the 2001. If you are only reloading a couple calibers, get the 750. I like both the dillon and lyman, If I needed one and didn't have one, I would go dillon.

Randy
Redwoods

Limited - STI Bedell 5" 40SW
Open - STI Sailor Custom 5" 38sc
Single Stack - Dan Wesson SSC 40SW
Production - S&W M&P9pro or CZ75 SP-01 Shadow Custom
3gun - Bushmaster AR15 20"bbl, Benelli M2 21"bbl

Dillon 550b and Super 1050

#15 User is offline   The_Vigilante 

  • Sees Sights Lift
  • PipPipPipPip
  • Group: Classified
  • Posts: 481
  • Joined: 20-August 08
  • Gender:Male
  • Location:El Paso, Texas

Posted 07 July 2009 - 12:03 PM

I purchased two of the Frankford Arsenal tumblers and am sorry I did. Both gave up the ghost shortly after the warranty expired-never again. RCBS appears to have a better warranty on their vibratory tumblers than any other company-why don't they get any mention? Is there a good reason? Any of you used the RCBS Vibratory cleaner? Review? Thanks
The_Vigilante
"A man can never own enough guns!"

#16 User is offline   danscrapbags 

  • Calls Shots
  • PipPipPipPipPip
  • Group: Classified
  • Posts: 760
  • Joined: 22-February 08
  • Gender:Male
  • Location:Wyoming, MN

Posted 07 July 2009 - 12:17 PM

I purchaced a inexpensive Cabela's brand tumbler, it is made by Berry Manufacturing, it costed about $40 and I have used it for about two years without an issue. Maybe I am just lucky but I love my little tumbler. I only go through 5-6000 rounds per year, so for me it works just fine. Good luck with what ever tumbler you go with.
Dan Hefta President MAPSA
Visit My Website

#17 User is offline   flyer 

  • Looks for Range
  • Pip
  • Group: Members
  • Posts: 16
  • Joined: 19-November 05

Posted 07 July 2009 - 01:45 PM

I too use a Thumbler Tumbler. Had it for 20 years and it's still going strong. Only plastic on that thing is the power cord strain relief and the bowl. The bowl is very thick and takes a beating.

Highly recommended. Ain't cheap, but it will last.

#18 User is offline   R A Miller 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 75
  • Joined: 22-May 02
  • Gender:Male
  • Location:Austin, TX

Posted 07 July 2009 - 02:21 PM

View Postflyer, on Jul 7 2009, 03:45 PM, said:

I too use a Thumbler Tumbler. Had it for 20 years and it's still going strong. Only plastic on that thing is the power cord strain relief and the bowl. The bowl is very thick and takes a beating.

Highly recommended. Ain't cheap, but it will last.

+1

I have a Thumbler Tumbler that I picked up used and it works great. I also have a Lymann tumbler that has a larger capacity than the Thumbler Tumbler but doesn't clean the brass as quickly. I've owned both of them for about 6 years.

Running empty with only media in the bowl the Thumbler Tumbler is soild. The Lymann will "walk" until I place some brass in it. FWIW the Lymann has held up a lot longer than I thought it would. Considering the price and the cheap construction, the Lymann still works fine.

Rick

Edited to add: I also have the Dillon small media separator. This is indispensable for making the task of cleaning brass go as quickly as possible.

This post has been edited by R A Miller: 07 July 2009 - 02:28 PM


#19 User is offline   Brooks 

  • Looks for Match
  • Pip
  • Group: Members
  • Posts: 46
  • Joined: 13-May 09
  • Gender:Male
  • Location:Washington

Posted 07 July 2009 - 02:48 PM

I have a cheap one i picked up at Cabelas. I am planning on buying a Dillon one eventually to add to it.

#20 User is offline   AWLAZS 

  • Calls Shots
  • PipPipPipPipPip
  • Group: Classified
  • Posts: 958
  • Joined: 12-September 03
  • Gender:Male
  • Location:Burlington,VT

Posted 07 July 2009 - 03:28 PM

I have been using a Frankford Arsenal for about 20 years. I wish it was bigger
"Do, or do not. There is no 'try'."
-Yoda



http://www.youtube.com/awlazs

http://www.gmps.ws

#21 User is offline   Jaxshooter 

  • Burned Out
  • PipPipPipPipPipPip
  • Group: Classified
  • Posts: 2,060
  • Joined: 19-September 05
  • Gender:Male
  • Location:Jacksonville, FL

Posted 07 July 2009 - 03:38 PM

I have a Lyman and a cheap Frankfort Arsenal tumbler. The FA does a better job and is much faster than the Lyman. I have had it for 5 years and it still runs great. The Lyman is ok but you have to run it 2 hours longer than the FA to get the same results.

#22 User is offline   opcx6 

  • Looks for Range
  • Pip
  • Group: Members
  • Posts: 15
  • Joined: 25-May 09
  • Gender:Male
  • Location:Bradford, Ontario

Posted 07 July 2009 - 06:37 PM

View Posttohlmann, on Jul 7 2009, 08:42 AM, said:

+1 for the "inexpensive" Frankford. Sometimes Midway USA runs a sale on them for $29.95. I've got two and have done 10's of 1000's of cases in them. Oh, by the way, the first case cleaner I bought was a Dillon. Lasted just over a year and the motor went out. Cost to replace the motor.... the price of a Frankford. Don't get me wrong about Dillon, they are the best at customer service and their products are first rate but their case cleaners, not so much.



My Dillon was under water for a week due to sump pump outlet blocked by ice, not covered by insurance, called Dillon to get a rreplacement motor, they said send it back they would replace it.

Dillon! :cheers:
"Cold hearted orb that rules the night, removes the colours from our sight, red is gray and yellow white, but we decide which is right and which is an illusion."

'Nights In White Satin'

#23 User is offline   n2ipsc 

  • Calls Shots
  • PipPipPipPipPip
  • Group: Classified
  • Posts: 558
  • Joined: 13-August 04
  • Gender:Male
  • Location:Bellingham, WA

Posted 07 July 2009 - 11:15 PM

View Postflyer, on Jul 7 2009, 01:45 PM, said:

I too use a Thumbler Tumbler. Had it for 20 years and it's still going strong...Highly recommended...Ain't cheap, but it will last.


+10 on that. My spousal unit bought me a UV-18 24 years ago (really), and it's still working just fine, thanks very much...
The "Great NorthWET" Section of USPSA…

USPSA L2396, IDPA A15850, NROI RM, NRA & CCRKBA Life Member...


"To get back my youth I would do anything in the world, except take exercise, get up early, or be respectable..." Oscar Wilde


#24 User is offline   fasteddy 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 67
  • Joined: 30-July 08
  • Gender:Male
  • Location:Australia

Posted 08 July 2009 - 05:49 AM

So to conclude this topic Dillon is the way to go..! I myself agree on to this.

#25 User is offline   Get'em Duck 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 116
  • Joined: 16-February 09
  • Gender:Male
  • Location:Lodgepole, ne

Posted 08 July 2009 - 06:07 AM

I run a lyman pro magnum 2500 with auto flo, is it the best for the money, I don't know but I do know I can turn nearly a 1000 rounds of 45 at a time. For the auto flo to work you do need a set of muffs and a little time but I don't have to sift through two gallons of media to find my brass. Just remove the lid turn on the unit and stir with my hand while the media drains into a bucket.
Kimber Custom II Target .45

  • (3 Pages)
  • +
  • 1
  • 2
  • 3
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users