Brian Enos's Forums... Maku mozo!: Stock glock recoil springs - Brian Enos's Forums... Maku mozo!

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Stock glock recoil springs

#1 User is offline   rtg 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 56
  • Joined: 31-December 08
  • Gender:Male
  • Location:Round Up City Oregon

Posted 20 January 2009 - 08:00 PM

I have a G34 and a G35 I have a 13 lb spring in the 34 and am going to change the spring in the 35. Does anyone know what the stock springs are. Thanks

This post has been edited by rtg: 20 January 2009 - 08:07 PM

#2 User is offline   SA Friday 

  • Brass balls...well, a picture of them, anyway.
  • PipPipPipPipPipPip
  • Group: Classified
  • Posts: 2,564
  • Joined: 18-February 06
  • Gender:Male
  • Location:Back in CO, WooHoo!

Posted 20 January 2009 - 08:23 PM

both the G34 and G35 use a 17lb stock spring. I use a 13 in my G34, G17 and G35 for competition. I use a 15 lb spring in my G24. It needs a tad more juice since the barrel is aftermarket and tighter.
Dry Firing and Practicing Sucks. Embrace the Suck.

#3 User is offline   islandtime 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 78
  • Joined: 16-March 08
  • Gender:Male
  • Location:Mobile, Alabama

Posted 20 January 2009 - 11:26 PM

I am using an ISMI 15lb spring and tungsten guide rod in my 35 and like it a whole lot better than the stock 17lb spring.

#4 User is offline   rtg 

  • Finally read the FAQs
  • PipPip
  • Group: Classified
  • Posts: 56
  • Joined: 31-December 08
  • Gender:Male
  • Location:Round Up City Oregon

Posted 25 January 2009 - 01:39 PM

View PostSA Friday, on Jan 20 2009, 09:23 PM, said:

both the G34 and G35 use a 17lb stock spring. I use a 13 in my G34, G17 and G35 for competition. I use a 15 lb spring in my G24. It needs a tad more juice since the barrel is aftermarket and tighter.



I just put in a 13 in my G35 If it ever quits snowing I will try it out...
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users