[gmshtr]

I'm setting up a steel challenge match here at USSA, and I'm trying to get the dimensions on a couple of stages. I've got the measurements for the #2 and #3 plates for 5 to Go, but I don't remember where I found them. (The diagram on the Steel Challenge website doesn't have them).

BTW, the distance from the centerline to the 2 & 3 plate on that stage is 3'5".

Anyway, I need to find out what the measurement is on the #4 plate on accelerator. The 14 is cut off, and I'm almost positive it's 14 feet, and a number of inches, but it's cut off on the diagram.

Any ideas?

Phil

[kmca]

I don't know where you got your measurements, but you might want to look at this:
http://www.brianenos...showtopic=33220

[TRNinTX]

Phil,

All of the measurements on Accelerator are in whole feet, no inches.