Brian Enos's Forums... Maku mozo!: New vs. old brass - Brian Enos's Forums... Maku mozo!

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

New vs. old brass

#1 User is offline   Rocket35 

  • Luck is when preparation meets opportunity
  • PipPipPipPipPipPipPip
  • Group: Classified
  • Posts: 3,120
  • Joined: 06-January 05
  • Gender:Male
  • Location:Los Lunas, NM

Post icon  Posted 13 July 2007 - 01:48 PM

I looked around and didn't find any info on this, so here is the question. Does new or once fired brass perform at a higher velocity than old used practice brass? I was chronographing today and this thought re-entered my mind. I have often wondered as I would like to use old brass at the "lost brass" matches.
What are your findings/opinions?
Jay Rock
Rudy Project USA Shooting Team
USMC 1990-2000


My Video Page
Visit my blog here

#2 User is offline   HSMITH 

  • Scaring old ladies and children....
  • PipPipPipPipPipPipPip
  • Group: Classified
  • Posts: 4,823
  • Joined: 19-January 06
  • Gender:Male
  • Location:Racine, WI

Posted 13 July 2007 - 02:12 PM

Hasn't made a difference to me, none that I have been able to track with any repeatability anyway. Brass is brass as far as I am concerned, it is like a light bulb in that it works fine or it doesn't work at all.

#3 User is online   G-ManBart 

  • Send me pics of your Model 10 !
  • PipPipPipPipPipPipPip
  • Group: Classified
  • Posts: 6,346
  • Joined: 30-December 06
  • Gender:Male
  • Location:Grosse Ile, MI

Posted 14 July 2007 - 12:38 PM

You might see a slight difference, but I doubt it would be significant. Easy way to find out would be to compare new with old loaded identically otherwise. I haven't seen any difference between once fired and cases that have been used five or six times (I try to note such things when I chrono). If anything, I'd guess the biggest difference would be between new and cases that have been fired half a dozen times or so. I know some large rifle cases will show a noticable difference between new and cases that have been fired, resized, and trimmed a couple of times, but I'm guessing that's because the used cases have a slightly different volume after being stretched, trimmed etc.
Bart AKA "Bulldozer"

TY23298
SOB #8 The Selfincriminator

Never argue with an idiot. They'll just drag you down to their level and beat you with experience!

#4 User is offline   Larry White 

  • aka: lkytx
  • PipPipPipPipPipPip
  • Group: Classified
  • Posts: 2,666
  • Joined: 26-January 03
  • Gender:Male
  • Location:Corpus Christi Texas

Posted 14 July 2007 - 01:16 PM

As brass is reloaded it gets harder as it is resized, belled and crimped. I would think that new brass, being softer would expand to seal the chamber better and faster. Thats just what I think. Could the average reloader with a chrono prove that? I doubt it, too many other vairables. If its not cracked and the rim looks ok its good as far as Im concerened.-----------Larry

This post has been edited by lkytx: 14 July 2007 - 01:19 PM

Swiftly, but silenty, stir the pot.---------------Larry

#5 User is offline   shred 

  • Looks for Primers
  • PipPipPipPipPipPipPip
  • Group: Moderators
  • Posts: 8,791
  • Joined: 10-October 01
  • Location:Austin, Texas

Posted 14 July 2007 - 05:28 PM

Brand new pistol brass chronos slightly different for me (usually a little bit higher), but the difference is pretty much insignificant.
"I am tired of all the friction between 'martial artists' and 'gamesmen' and trap shooters who don't talk to skeet shooters and IPSC guys who won't shoot steel-- Every style of shooting is fun, and whether you enjoy it or not shouldn't hurt another persons enjoyment of it."-- BE, PSBF

#6 User is offline   Rocket35 

  • Luck is when preparation meets opportunity
  • PipPipPipPipPipPipPip
  • Group: Classified
  • Posts: 3,120
  • Joined: 06-January 05
  • Gender:Male
  • Location:Los Lunas, NM

Posted 16 July 2007 - 12:41 PM

OK- thanks everyone for all your insight.
Jay Rock
Rudy Project USA Shooting Team
USMC 1990-2000


My Video Page
Visit my blog here

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users