Ambi, fiber optic front sight, magwell And 40 cal.
Kevin
Single_stack006.jpg 627.04K
923 downloads
Single_stack005.jpg 629.62K
543 downloads
Single_stack004.jpg 642.17K
456 downloads
Single Stack Photo Thread
Started by
dirtypool40
, Jan 11 2007 08:39 PM
735 replies to this topic
#51
blue edge
-
- Classifieds
-
- 915 posts
Calls Shots
- Gender:Male
- Location:Louisville KY.
Posted 03 February 2007 - 08:41 PM
OK so I went over to Shooters connection today and BS'ed with Chuck. Ater about 3 hours and 5 times of saying " well I have to go" I just could not leave without bringing this home!
Ambi, fiber optic front sight, magwell And 40 cal.
Kevin
Single_stack006.jpg 627.04K
923 downloads
Single_stack005.jpg 629.62K
543 downloads
Single_stack004.jpg 642.17K
456 downloads
Ambi, fiber optic front sight, magwell And 40 cal.
Kevin
Single_stack006.jpg 627.04K
923 downloads
Single_stack005.jpg 629.62K
543 downloads
Single_stack004.jpg 642.17K
456 downloads
#52
JakeMartens
-
- Classifieds
-
- 2,857 posts
aka: fortyfiveshooter
- Gender:Male
- Location:Indianapolis, IN
Posted 03 February 2007 - 08:44 PM
[qoute]
Hello Jake,
I had no idea you are a fellow Springfield TRP Professional owner with your certificate dated 09-11-01, too cool. I'll be at the single stack nationals this year with that pistol.
By the way, the S&W M&P I picked up from you has been flawless. Love it!
See ya dude!
[/quote]
Nice to hear about the M&P
The Pro is one I wish I never sold, but was made an awesome offer that I could not pass up
Hello Jake,
I had no idea you are a fellow Springfield TRP Professional owner with your certificate dated 09-11-01, too cool. I'll be at the single stack nationals this year with that pistol.
By the way, the S&W M&P I picked up from you has been flawless. Love it!
See ya dude!
[/quote]
Nice to hear about the M&P
The Pro is one I wish I never sold, but was made an awesome offer that I could not pass up
Jake Martens
A52987
Indiana USPSA Section Coordinator
Indiana USPSA Championship
http://www.uspsaindiana.org/
Shooting Videos
A52987
Indiana USPSA Section Coordinator
Indiana USPSA Championship
http://www.uspsaindiana.org/
Shooting Videos
#53
Derek45
-
- Classified
-
- 863 posts
Calls Shots
- Gender:Male
- Location:Near St.Louis
Posted 03 February 2007 - 09:00 PM
Started out as a basic blue steel Kimber Classic.
Ken Hallock milled the slide for the Bo-Mar
I hand checkered it 20lpi.
Blended a CMC extreme beavertail and wide ambi Brown safety.
KART barrel, handfitted.
S&A magwell, blended.
Brazo front sight.
STI internals
Hard Chromed by METALIFE
This gun has had about a zillion rounds through it, and continues to be a fine shooter.
Ken Hallock milled the slide for the Bo-Mar
I hand checkered it 20lpi.
Blended a CMC extreme beavertail and wide ambi Brown safety.
KART barrel, handfitted.
S&A magwell, blended.
Brazo front sight.
STI internals
Hard Chromed by METALIFE
This gun has had about a zillion rounds through it, and continues to be a fine shooter.
"The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles."
-Jeff Cooper
-Jeff Cooper
#54
Zerwas
-
- Classifieds
-
- 1,044 posts
something else?
- Gender:Male
- Location:Twin cities, Minnesota
Posted 09 February 2007 - 10:22 AM
Here are the updated photos of the TRP Professional with the short curved trigger installed and the arched S&A mag well put in place as well as the Dawson fiber optic front site.
and another one...
and another one...
Steven Z
Team Unholstered
Team Grundhauser Gunworks
L2504
Get to know HIM before HE pays you a visit......
Open: M, Limited: M, Single Stack:M
Production: A, Limited-10: A,
Valkyrie0307 USPSA Youtube videos
Team Unholstered
Team Grundhauser Gunworks
L2504
Get to know HIM before HE pays you a visit......
Open: M, Limited: M, Single Stack:M
Production: A, Limited-10: A,
Valkyrie0307 USPSA Youtube videos
#55
TDean
-
- Classifieds
-
- 2,411 posts
SeenTheLight
- Gender:Male
- Location:Seattle, WA. USA
Posted 09 February 2007 - 08:31 PM
....because I can't edit my post (change pics) in my original post, here's a re-post with brighter pics.
[quote name='TDean' date='Feb 1 2007, 07:09 PM' post='507598']
My inwork SSD gun.
Springfield, 1911-A1, "Black Stainless".
It's in Stock configuration, but within a week the addition will be:
-Ed Brown Ambi's (stainless)
-C&S Hammer, Disco, Sear
-S&A Magwell
-Caspian rear sight, LPA
-Dawson FO front sight.
-Wilson extended mag releas
-Infinity trigger, Silver, long curved.
[quote name='TDean' date='Feb 1 2007, 07:09 PM' post='507598']
My inwork SSD gun.
Springfield, 1911-A1, "Black Stainless".
It's in Stock configuration, but within a week the addition will be:
-Ed Brown Ambi's (stainless)
-C&S Hammer, Disco, Sear
-S&A Magwell
-Caspian rear sight, LPA
-Dawson FO front sight.
-Wilson extended mag releas
-Infinity trigger, Silver, long curved.
God bless the USA.
#56
pierce195
-
- Classified
-
- 137 posts
Finally read the FAQs
- Gender:Male
- Location:New Castle, Indiana
Posted 11 February 2007 - 01:03 PM
This is my new stock Springfield MC Operator. I just need a holster and some mags and cant wait for the season to start next month.
Attached Files
-
Alot_623__2_.jpg 69.54K
394 downloads
Edited by pierce195, 11 February 2007 - 01:04 PM.
Rudy Project Competition Squad
A-55127
Sniper Company
LE Sale
pierce@snipercompany.com
A-55127
Sniper Company
LE Sale
pierce@snipercompany.com
#57
blue edge
-
- Classifieds
-
- 915 posts
Calls Shots
- Gender:Male
- Location:Louisville KY.
Posted 11 February 2007 - 02:23 PM
This is my new stock Springfield MC Operator. I just need a holster and some mags and cant wait for the season to start next month.
Welcome to ss Matt, nice gun
#58
pierce195
-
- Classified
-
- 137 posts
Finally read the FAQs
- Gender:Male
- Location:New Castle, Indiana
Posted 11 February 2007 - 03:48 PM
Thanks, I would like to get down south this year and do some shooting around your area.
This is my new stock Springfield MC Operator. I just need a holster and some mags and cant wait for the season to start next month.
Welcome to ss Matt, nice gun
Rudy Project Competition Squad
A-55127
Sniper Company
LE Sale
pierce@snipercompany.com
A-55127
Sniper Company
LE Sale
pierce@snipercompany.com
#59
blue edge
-
- Classifieds
-
- 915 posts
Calls Shots
- Gender:Male
- Location:Louisville KY.
Posted 12 February 2007 - 06:32 PM
Come on down 
#60
dcarter
-
- Classifieds
-
- 2,281 posts
Burned Out
- Gender:Male
- Location:Cincinnati, OH.
Posted 13 February 2007 - 12:18 AM
I'm not going to put up a picture cause you've seen it I'm sure. I have a Kimber Team match with a Dawson front sight. Shoots like a dream.
"One of Cincinnati's finest." Well, one of Cincinnati's anyway.
Freedom Gunworks team
Freedom Gunworks team
#61
zen_grasshopper
-
- Classified
-
- 47 posts
Looks for Match
- Gender:Male
- Location:South Dakota
Posted 20 February 2007 - 02:37 AM
It's been posted before, but what the heck.
Jon
Jon
"Real knowledge is to know the extent of one's ignorance." - Confucious
#62
n2ipsc
-
- Classifieds
-
- 586 posts
Calls Shots
- Gender:Male
- Location:Bellingham, WA
Posted 25 February 2007 - 09:20 PM
The "Great NorthWET" Section of USPSA…
USPSA L2396, NRA & CCRKBA Life Member...
" The most glaring example of the cognitive dissonance on the Left is the concept that human beings are inherently good, yet at the same time cannot be trusted with any kind of weapon..." Moshe Ben-David
" The Left quite often exposes its raging elitism through its odious habit of asking why anyone would 'need' the things it doesn't like - from guns, to big homes, to monster trucks. The implication is that, if the elitists don't want whatever it is, then no one should be allowed to have it - except, of course, it's fine for the elitists themselves to live in energy-sucking mansions, hire armed bodyguards, and drive around in gas-guzzling limousines and SUVs..." Greg Gutfeld
" The descriptor of 'Ruling Class,' once only directed at tyrannical foreign regimes, increasingly applies to the Washington elitists who clearly view themselves as superior in intellect and privilege to the rabble and peasantry..." Christopher Adamo
" The smallest minority on earth is the Individual; those who would deny individual rights cannot claim to be defenders of minorities..." Ayn Rand
USPSA L2396, NRA & CCRKBA Life Member...
" The most glaring example of the cognitive dissonance on the Left is the concept that human beings are inherently good, yet at the same time cannot be trusted with any kind of weapon..." Moshe Ben-David
" The Left quite often exposes its raging elitism through its odious habit of asking why anyone would 'need' the things it doesn't like - from guns, to big homes, to monster trucks. The implication is that, if the elitists don't want whatever it is, then no one should be allowed to have it - except, of course, it's fine for the elitists themselves to live in energy-sucking mansions, hire armed bodyguards, and drive around in gas-guzzling limousines and SUVs..." Greg Gutfeld
" The descriptor of 'Ruling Class,' once only directed at tyrannical foreign regimes, increasingly applies to the Washington elitists who clearly view themselves as superior in intellect and privilege to the rabble and peasantry..." Christopher Adamo
" The smallest minority on earth is the Individual; those who would deny individual rights cannot claim to be defenders of minorities..." Ayn Rand
#63
Tokarev
-
- Classifieds
-
- 918 posts
Calls Shots
- Gender:Male
- Location:Artesia, NM
Posted 26 February 2007 - 06:56 PM
This is my STI Trojan that Virgil Tripp chromed for me. Other than the STI mag well and EGW front sight, it's pretty much stock.
The gun I'll be using at the Single Stack Nationals. It's a stainless TRP with Yost hammer and sear and a set of Millett sights. And it's been radically de-horned by Springfield Custom.
My 9mm Kimber that I used last year in Single Stack. I like the gun but I can't shoot C's fast enough to keep up with a .45. It has STI internals, an S&A mag well, EGW front and checkering from Kimber's Custom Shop.
The gun I'll be using at the Single Stack Nationals. It's a stainless TRP with Yost hammer and sear and a set of Millett sights. And it's been radically de-horned by Springfield Custom.
My 9mm Kimber that I used last year in Single Stack. I like the gun but I can't shoot C's fast enough to keep up with a .45. It has STI internals, an S&A mag well, EGW front and checkering from Kimber's Custom Shop.
When a man knows he'll die if he stays where he is, it concentrates his mind wonderfully on moving somewhere else.
#64
TCK
-
- Classified
-
- 308 posts
Sees Sights
- Location:Dayton, OH
Posted 03 March 2007 - 02:48 PM
I finally joined the SS crowd, here is my new Spartan. I still want to add a magwell and swap the front sight out for a black one. I refinished the frame today to give it a subtle two-tone look, also added some grip tape t the front strap. When I add the magwell, I will be changing the grips as well.
S_010.jpg 657.45K
183 downloads
S_010.jpg 657.45K
183 downloads
A-53794
Team-Uncle PimpDaddy
It's not how fast you shoot, its how fast you shoot well.
Team-Uncle PimpDaddy
It's not how fast you shoot, its how fast you shoot well.
#65
shadetree
-
- Classified
-
- 560 posts
Calls Shots
- Location:Gig harbor Washington State
Posted 03 March 2007 - 05:49 PM
It's been posted before, but what the heck.
Jon
I really like the look of those grips. Where could I get a pair like that If you don't mind me asking?
#66
zen_grasshopper
-
- Classified
-
- 47 posts
Looks for Match
- Gender:Male
- Location:South Dakota
Posted 04 March 2007 - 08:27 AM
They are Simonich Gunner grips, that are now being made by Strider Knives.
Brownells has them, but are currently out of stock. You can buy them online from many other places, just Google it. If you can't find any places just shoot me a PM.
Jon
Brownells has them, but are currently out of stock. You can buy them online from many other places, just Google it. If you can't find any places just shoot me a PM.
Jon
"Real knowledge is to know the extent of one's ignorance." - Confucious
#67
zhunter
-
- Classifieds
-
- 6,635 posts
Proud Owner of a Self-Built AR
- Gender:Male
- Location:Palm Beach Gardens, FL
Posted 04 March 2007 - 08:37 AM
They are not only good looking, but GREAT grips. I love them. I saw them on a buddies gun and HAD to have them.
Enjoy!!
Edited to add:
I wish all the cool stuff I see and "have to have" was as inexpensive as those grips
Enjoy!!
Edited to add:
I wish all the cool stuff I see and "have to have" was as inexpensive as those grips
Edited by zhunter, 04 March 2007 - 08:42 AM.
#68
dirtypool40
-
- Classified
-
- 4,143 posts
My IPSC addiction is in financial remission.
- Gender:Male
- Location:Sarasota, FL, USA
Posted 05 March 2007 - 05:58 PM
. no joy, trying to post my old .40 Delta
Edited by dirtypool40, 05 March 2007 - 06:01 PM.
“Be ashamed to die until you have done something good for mankind.”
American pastor Dr. Vernon Johnson during the Revolutionary War
American pastor Dr. Vernon Johnson during the Revolutionary War
#69
BIG WILL
-
- Classified
-
- 35 posts
Looks for Match
- Location:NE MISSISSIPPI
Posted 05 March 2007 - 08:05 PM
Building a new L-10. Might take a year to finish, but it will be worth it. What do you think?
Building a new L-10. Might take a year to finish, but it will be worth it. What do you think?
DSCN0278_edited.JPG 15.96K
872 downloads
DSCN0276.JPG 11.41K
696 downloads
DSCN0288.JPG 13.79K
653 downloads
Building a new L-10. Might take a year to finish, but it will be worth it. What do you think?
DSCN0278_edited.JPG 15.96K
872 downloads
DSCN0276.JPG 11.41K
696 downloads
DSCN0288.JPG 13.79K
653 downloads
#71
BIG WILL
-
- Classified
-
- 35 posts
Looks for Match
- Location:NE MISSISSIPPI
Posted 05 March 2007 - 08:46 PM
Big Will
That looks very cool!!
Thanks. The frame is a colt ser 70 that I modified. STI ambi, that I modified. Brown beaver. The frame will be black parkerized and black grips. EVERYTHING else is stainless. I'm happy with the slide. It is SS STI trojan (unmarked). I'm anxious to get it done.
#72
RodneyLtd
-
- Classified
-
- 104 posts
aka: Yendor
- Gender:Male
- Location:Fayetteville, GA
Posted 07 March 2007 - 02:50 PM
My SS45 blaster.
#73
Jeff Turner
-
- Classifieds
-
- 1,180 posts
As far as PB, Jiff get's the nod.
- Gender:Male
- Location:Indiana
Posted 15 March 2007 - 08:00 PM
The only photos I have at the moment.
1911 Single Stack Elitist Club #30 - Honorary Member
#74
hitman_usmc
-
- Classified
-
- 119 posts
Finally read the FAQs
- Gender:Male
- Location:San Clemente CA
Posted 18 March 2007 - 12:17 AM
Just about everything was done by Alan Tanka. Rebuilt with ed brown and cylinder&slide parts.
Former USMC
Current LEO
Current LEO
#75
MichiganShootist
-
- Classified
-
- 1,532 posts
Beyond it All
- Gender:Male
- Location:Lake, Michigan
Posted 20 March 2007 - 01:12 PM
That's pretty funny... Here's my favorite Kimber done in the reverse colors.
It's a Custom Target II in which 100% of the internals have been replaced. I wore the finish off shooting CDP out of a Kydex holster for a couple seasons.. and had it refinished by Metaloy.... after I added the snake skin mainspring housing.
Kimber_002.jpg 272.94K
280 downloads
It's a Custom Target II in which 100% of the internals have been replaced. I wore the finish off shooting CDP out of a Kydex holster for a couple seasons.. and had it refinished by Metaloy.... after I added the snake skin mainspring housing.
Kimber_002.jpg 272.94K
280 downloads
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
