What is your favorite A2 length stock other than the milspec A2, or ACE.
Who makes the smallest diameter handguard that would be easy to mount on a milspec nut(want to change out the standard 2 piece on a carbine)
favorite A2 length stock, handguard for milspec nut
Started by
fastarget
, Mar 28 2012 08:57 AM
7 replies to this topic
#1
fastarget
-
- Classifieds
-
- 1,183 posts
Beyond it All
- Gender:Male
- Location:Grand Junction ,Colorado
Posted 28 March 2012 - 08:57 AM
"L'audace, l'audace, toujours l'audace."
Life can only be understood backwards, but must be lived forwards...
Life can only be understood backwards, but must be lived forwards...
#2
maddox
-
- Classified
-
- 173 posts
Looks for Target
- Gender:Male
- Location:Troy, AL
Posted 28 March 2012 - 09:11 AM
I think Samson will be your best bet for handguard
#3
michael1778
-
- Classifieds
-
- 422 posts
Sees Sights Lift
- Gender:Male
- Location:Clemmons, NC
Posted 28 March 2012 - 12:36 PM
+1 on the Samson
"Oh <bleep> it!!! I'll try shooting Open...."
Carbon Arms 16" upper on a Firebird lower that I built!! (Firebird comp, Vortex Viper PST 1-4x MOA - capped, MagPul MOE Rifle stock, AR Gold trigger, JP captured spring)
Remington Versa Max 26" (C-rums lifter/trigger/load port/rib sight, full-size XRAIL, extended Remington factory chokes)
S&W M&P 9mm Pro 5" (Burwell Competition trigger job, Burris Fastfire III - 8 MOA, SSS Limited mag well & Taylor Freelance +10 base pads)
Carbon Arms 16" upper on a Firebird lower that I built!! (Firebird comp, Vortex Viper PST 1-4x MOA - capped, MagPul MOE Rifle stock, AR Gold trigger, JP captured spring)
Remington Versa Max 26" (C-rums lifter/trigger/load port/rib sight, full-size XRAIL, extended Remington factory chokes)
S&W M&P 9mm Pro 5" (Burwell Competition trigger job, Burris Fastfire III - 8 MOA, SSS Limited mag well & Taylor Freelance +10 base pads)
#4
Clint-M
-
- Classifieds
-
- 227 posts
Sees Target
- Gender:Male
- Location:Round Rock, TX
Posted 28 March 2012 - 12:49 PM
I think the new Troy rails work with the milspec nut.
CM
CM
#5
Bryan 45
-
- Classifieds
-
- 1,922 posts
Beyond it All
- Gender:Male
- Location:Elizabethtown, KY
Posted 28 March 2012 - 01:14 PM
I have been using a Vltor fixed A1 length stock. It provides a good cheekweld, is solid, and lightweight. They are available in A2 length also.
The Samson Evo mounts directly to a stock milspec barrel nut and is available in about 1/2 dozen different lengths. This one is a 15" w/ an 18" barrel.
The Samson Evo mounts directly to a stock milspec barrel nut and is available in about 1/2 dozen different lengths. This one is a 15" w/ an 18" barrel.
Edited by Bryan 45, 28 March 2012 - 01:14 PM.
Will work for 3 gun ammo!
#6
fastarget
-
- Classifieds
-
- 1,183 posts
Beyond it All
- Gender:Male
- Location:Grand Junction ,Colorado
Posted 28 March 2012 - 01:41 PM
nice, looks good,
I will look up the samson and troy, something without the bottom or side rails, for a lady I am building a lightweight AR for.
I will look up the samson and troy, something without the bottom or side rails, for a lady I am building a lightweight AR for.
"L'audace, l'audace, toujours l'audace."
Life can only be understood backwards, but must be lived forwards...
Life can only be understood backwards, but must be lived forwards...
#7
Jaxshooter
-
- Classifieds
-
- 3,554 posts
Back From the Dead
- Gender:Male
- Location:Jacksonville, FL
Posted 28 March 2012 - 02:49 PM
Nordic Components has a small diameter hand guard that will fit. It is under 2" in diameter. Check their website.
Rudy Project Shooting Squad
USPSA CRO w/3Gun Endorsement
ICORE RO
IDPA Safety Officer
USPSA CRO w/3Gun Endorsement
ICORE RO
IDPA Safety Officer
#8
fastarget
-
- Classifieds
-
- 1,183 posts
Beyond it All
- Gender:Male
- Location:Grand Junction ,Colorado
Posted 28 March 2012 - 02:54 PM
Nordic Components has a small diameter hand guard that will fit. It is under 2" in diameter. Check their website.
also an interesting choice, the price is attractive. I will check with them to see how low of a profile gas block that will clear.
"L'audace, l'audace, toujours l'audace."
Life can only be understood backwards, but must be lived forwards...
Life can only be understood backwards, but must be lived forwards...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
