Want to start loading for my Trojan 5.0 should be picking one up at the end of the month. I have 180gr MG Bullets, Titegroup and Power Pistol whats the boast OAL and Powder you guys are running.
Trojan 5.0 40 S&W loads
Started by
deerassassin22
, Oct 15 2011 05:10 PM
6 replies to this topic
#1
deerassassin22
-
- Classifieds
-
- 211 posts
Sees Target
- Gender:Male
- Location:Phenix City, AL
Posted 15 October 2011 - 05:10 PM
#2
Flexmoney
-
- Admin
-
- 37,116 posts
All Seeing and All Knowing Eye
- Location:Ohio (Columbus, McConnelsville)
Posted 24 October 2011 - 10:21 AM
I will move this thread to the 40 caliber forum, which would be a good forum to search in for previous threads that may cover your question.
- Admin.
- Admin.
Thank you,
Kyle F.
Brian Enos Forum Administrator
Area 5 Director - USPSA
Chief Range Officer
NRA Instructor
*** I'm a shooter! ***
"Do you even [see your sights] lift???" - unknown
Kyle F.
Brian Enos Forum Administrator
Area 5 Director - USPSA
Chief Range Officer
NRA Instructor
*** I'm a shooter! ***
"Do you even [see your sights] lift???" - unknown
#3
raz-0
-
- Classifieds
-
- 1,289 posts
Beyond it All
- Gender:Male
- Location:Sayreville, NJ
Posted 24 October 2011 - 12:00 PM
Well I have a fusion .40 caliber kit which is in theory STI parts. I had some 1.135 nominal AOL ammo with plated berrys 180gr heads over between 4.4 and 4.5 grains of titegroup. It was making about 172pf. Montana gold is going to give lower velocities, and barrels vary, but it's a data point.
#4
jcc7x7
-
- Classified
-
- 127 posts
Finally read the FAQs
- Gender:Male
- Location:Midland TX
Posted 10 November 2011 - 08:22 PM
Titegroup is an obvious favorite and PP is nice but has a fair amount of flash
#5
deerassassin22
-
- Classifieds
-
- 211 posts
Sees Target
- Gender:Male
- Location:Phenix City, AL
Posted 10 March 2012 - 03:34 PM
OLD THREAD COMING ALIVE. Whats the OAL is anybody pushing 1.150? thats what I run in my STI Eagle hopefully I won't have to change the length.
#6
jmbaccolyte
-
- Classifieds
-
- 263 posts
Sees Sights
- Gender:Male
- Location:Des Moines, Iowa
Posted 10 March 2012 - 03:56 PM
I don't use TG. But I found several posts on the forum saying they use TG in STIs with 180 grain bullets and a lot of them are using OAL closer to 1.17" to 1.19" with powder charges ranging from 4.2 grains to 4.7 grains. Hope this helps.
#7
Ronnie j
-
- Classifieds
-
- 473 posts
Sees Sights Lift
- Gender:Male
- Location:Marietta ,GA
Posted 10 March 2012 - 05:37 PM
1.180 in 10mm mags and about 4.9 titegroup
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
