I'd to know if anyone has reloading data for .40 cal 180 gr. lead bullet using Win. Super Light. Length of bullets are 1.16. Barrel is 5". Need to make major.
.40 load for 180 GR. lead using WSL
Started by
texasag93
, Apr 06 2004 06:16 PM
7 replies to this topic
#1
texasag93
-
- Classified
-
- 859 posts
Calls Shots
- Gender:Male
- Location:Denver City, TX
Posted 06 April 2004 - 06:16 PM
"That's a double, I never miss!"
A44741
A44741
#2
eric nielsen
-
- Classifieds
-
- 2,454 posts
aka: caspian28r
- Gender:Male
- Location:st. petersburg fl
Posted 06 April 2004 - 07:20 PM
The exact same load as you see listed for Hodgdon TiteGroup.
Somewhere around 3.6-3.9gr for lead.
Somewhere around 3.6-3.9gr for lead.
dvc - eric - a28026
PharmD (Univ of Florida)
PharmD (Univ of Florida)
#3
gm iprod
-
- Classifieds
-
- 3,020 posts
Back From the Dead
Posted 08 April 2004 - 03:45 AM
Winchester manual list the following for 170 LeaD.
START .2GR LOWER AND BE CAREFULL
4.3gr = 940fps
4.8gr = 1030fps.
All loaded to about 1.150", so if you load longer these should be fine with a 180gr Lead.
START .2GR LOWER AND BE CAREFULL
4.3gr = 940fps
4.8gr = 1030fps.
All loaded to about 1.150", so if you load longer these should be fine with a 180gr Lead.
So many guns, so little time.
"For those people who think he's done his time and should be let out, perhaps invite him to their family, their daughters, bounce their kids up and down on his knee and see what they think?"
"For those people who think he's done his time and should be let out, perhaps invite him to their family, their daughters, bounce their kids up and down on his knee and see what they think?"
#4
texasag93
-
- Classified
-
- 859 posts
Calls Shots
- Gender:Male
- Location:Denver City, TX
Posted 08 April 2004 - 03:49 AM
Thanks for the info. Will try this this weekend. TXAG.
"That's a double, I never miss!"
A44741
A44741
#5
dickwholliday
-
- Classifieds
-
- 268 posts
Sees Sights
- Location:Wilmington NC
Posted 08 April 2004 - 05:56 AM
Here ya go.....Straight from Dick's Chrono.....
4.4WSL 180 gr Valiant Truncated cone LOA 1.180 ....5" Para
AVG for 15 shots was 919FPS
Same load at 1.175 928 AVG for 8 shots
Good shoot'n....Dick
4.4WSL 180 gr Valiant Truncated cone LOA 1.180 ....5" Para
AVG for 15 shots was 919FPS
Same load at 1.175 928 AVG for 8 shots
Good shoot'n....Dick
#6
Trini
-
- Classifieds
-
- 377 posts
Sees Sights Lift
- Gender:Male
- Location:Ozawkie,Ks
Posted 08 April 2004 - 05:27 PM
Go to Jeff M. page for WSL load info.. Wondering where you found WSL? Haven't seen any for a some time now... It was my most favorite Winchester powder.. I have 10 one lb. cans left.
T
T
#7
tightloop
-
- Classified
-
- 10,335 posts
Mr. Sunshine
- Gender:Male
- Location:Spring, Tx 77389
Posted 08 April 2004 - 07:05 PM
Ag93
A little late to be working up a load for the SCC, isn't it?
A little late to be working up a load for the SCC, isn't it?
#8
texasag93
-
- Classified
-
- 859 posts
Calls Shots
- Gender:Male
- Location:Denver City, TX
Posted 08 April 2004 - 07:57 PM
Trini, had a large supply. Tightloop, that was a friend of mine that wanted to know. I have had my load for awhile. Zero 165 JHP, 5.0 TG. Works great in my P16. Thanks for the info guys. TXAG
"That's a double, I never miss!"
A44741
A44741
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
